Cushioning Roller Covering System

Please note that all non-golf VinylGuard products that were previously ordered online will now be exclusively available online through two distribution partners:

McMaster Carr
www.McMaster.com | 404-346-7000

Grainger
www.Grainger.com | 1-800-GRAINGER

We expect this change to result in shorter lead times and improved service levels for you.  If you are a direct customer (orders over $2,500, not online), please note that you should continue to work with Insultab customer service for all your order needs.

Apply an added layer of protection to 1.9”-2.0” metal conveyor rollers with VinylGuard’s cushioning, shock-absorbing, rugged and abrasion-resistant coverings. Using heat shrink-to-fit technology, coverings are added quickly and easily.

Cushioning Roller Covering System – Foam Rubber Cushioning Tubes

Supplied in 5-ft. lengths

  • 1/4″ thick nitrile butadiene foam rubber provides a cushioning and bounce dampening surface
  • High-compression foam construction cushions weights of up to 40 pounds per square inch – A 10-inch roller supports loads of up to 400 pounds over its full length
  • Closed cell construction – Foam rubber will not absorb or transmit moisture or liquids used for sanitary wash-downs and maintenance
  • Easily cut to cover the exact length of the 1.9″-2.0″ roller
  • Minimal scrap waste – Odd lengths of foam rubber can be abutted over rollers and covered with VinylGuard

Rubber Cushioning Tubes

Shock Absorbing-Cushioning Foam and Orange VinylGuard Cover for Straight Rollers

Shock Absorbing – Cushioning Roller Coverings

USFDA Shock Absorbing-Cushioning Foam and White VinylGuard Cover for Straight Rollers

USFDA Food-Grade Cushioning Roller Coverings

VinylGuard Protective Covering

Supplied in 50-ft. spools

  • VinylGuard shrink-to-fit covering is specifically diameter-sized to cover, secure and protect the foam rubber and provide a rugged, cushioned roller surface
  • 50 mils thick, VinylGuard conveyor roller covers are long-lasting and highly abrasion, chemical and oil resistant
  • Technical Data:
    • Minimum Recommended Shrink Temperature: 100°C (212°F)
    • Operating Temperature Range: -20°C to 105°C (-4°F to 221°F)
    • Tensile Strength: 3,000 psi
    • Durometer: 85 Durometer Shore A
    • Storage: Heat sensitive – Store at 70°F or below
  • Made in the USA from the finest premium-grade, 100% virgin materials
  • Lead-free, RoHS compliant and flame retardant

Available in USFDA (21 CFR) Food-Grade VinylGuard for material handling equipment that complies with the Food and Drug Administration’s requirements for indirect contact with food.

Shop VinylGuard Protective Covering Systems

Shock Absorbing-Cushioning Foam and Orange VinylGuard Cover for Straight Rollers

Shock Absorbing – Cushioning Roller Coverings

USFDA Shock Absorbing-Cushioning Foam and White VinylGuard Cover for Straight Rollers

USFDA Food-Grade Cushioning Roller Coverings

Standard VinylGuard Colors

3 standard colors for the cushioning, shock absorbing roller cover system

Color swatches

1 standard color for the Food-Grade USFDA (21 CFR) cushioning, shock absorbing roller cover system

White color swatch

(Custom colors available upon request)

Please note that all non-golf VinylGuard products that were previously ordered online will now be exclusively available online through two distribution partners:

McMaster Carr
www.McMaster.com | 404-346-7000

Grainger
www.Grainger.com | 1-800-GRAINGER

We expect this change to result in shorter lead times and improved service levels for you.  If you are a direct customer (orders over $2,500, not online), please note that you should continue to work with Insultab customer service for all your order needs.

Scroll to Top